Gastric lavage tube
For feeding or emptying of stomach contents or gastric lavage. Colour-coded connectors for easy identification of dimension. Tube with closed rounded tip. Centimeter marks. Stomach tube length 800 mm with 10 cm depth markings: 45, 55 and 65 cm from the distal end.
Vomit bag with closure ring
Product information: Color: Blue or red Size: 2000 ml Product code: HM-210170-B or -R Unit of Measure: BOX/30x20
Warmth blanket OptiCover | with neck opening
Color: White Product code: HM-210142 Unit of Measure: BOX/5X10
OR table cover | with liquid-repellent cover
This table cover prevents the transfer of microorganisms and protects the table surface in the OR. Due to the moisture-resistant coating, the moisture does not penetrate into the table surface and can be easily absorbed. We supply this product in size 80x240 cm as standard, but can also supply different sizes on request.
Pleura-safe® pleural puncture set
During the development of Pleura-safe®, the previous techniques were newly developed and simplified. This technique allows direct removal of fluid through the lancing needle (Veress needle) or the catheter.
Absorbent cover | PP & PE material with pulp layer
By using this absorbent cover you create an environment that is as comfortable and safe as possible for the patient. Due to the high absorbent effect, approximately three and a half liters of moisture can be absorbed (in case of size L). The materials used are skin-friendly, hypoallergenic and latex-free.
elastoFILM incise drape
This sterile incise drape serves to cover the patient's intact skin at the incision area. Due to the material used, this foil easily adapts to the skin and body shapes, so that an optimal fit is guaranteed. The foil is transparent and adhesive, water-resistant, permeable to water vapor and breathable.
OR surgical table cover
This OR table cover helps to prevent cross-contamination by creating a protective barrier between the table and the patient. Due to the material combination used, this sheet is liquid impervious and completely latex-free to prevent irritation. The sheet is provided with anti-drop wax edges on both sides, to prevent the sheet from falling off the table quickly.
Anti-slip absorbent cover | PP & PE material with pulp layer
By using this absorbent cover you create an environment that is as comfortable and safe as possible for the patient. Due to the high absorbent effect, approximately three and a half liters of moisture can be absorbed (in case of size L). The materials used are skin-friendly, hypoallergenic and latex-free.
Protextra™ Sensitive Nitrile medical exam glove (accelerator-free)
In addition to our standard nitrile examination gloves, these special nitrile gloves offer extra skin friendliness. This is achieved by the MGEN-2 manufacturing technology, which makes the glove free of chemical accelerators and other potentially allergy-causing substances.
Protextra™ Standard Nitrile medical examination gloves
This glove meets all mandatory European standards for examination gloves and can therefore be widely used for non-sterile, non- to low-chemical, short-term medical procedures.
NRFit® Mini Set (CSE)
During epidural and spinal anesthesia, it is used for spinal and epidural puncture, and injection of liquid drugs into the epidural or subarachnoid space
Foldable FFP2 mask | Non-Valved |
Normally, FFP2-masks only meet the EN149-norm, since this is the mandatory European norm for this mask. Initially, the FFP2 mask was not primarily designed for medical use, and is normally mostly used as dust mask. However, the COVID-19 pandemic resulted in an enormous increase in the medical use of FFP2 masks, as they do offer supreme protection of both the user (when breathing in) and the patient (when breathing out).
VenoFlow™ Safety blood collection needles
This product allows you to take blood samples safely and easily. If necessary, you can connect multiple tubes one after the other to the luer connector without having to change needles. This allows you to draw the required amount of blood. The safety mechanism can be easily activated with one hand, allowing safe disposal of the product and drastically reducing the risk of needlestick injuries.
EDTA tubes
These EDTA tubes are coated with K2EDTA or K3EDTA. This additive has an anticoagulant function by binding the calcium ions. Instructions: Mixing Indication: Gently invert the tube 6-8 times immediately after blood collection. -Spin speed: no spin -Sample preservation: after centrifugation, see the following table for the applicable maximum preservation time per storage temperature: Up to 24°C Between 2 - 4°C 6 hours < 24 hours
Clot activator tubes
Mixing indications: immediately after blood collection, gently invert the sample 6-8 times. Minimum time before centrifugation: 30 minutes after collection. Maximum time before centrifugation: 2 hrs after collection. Centrifugation speed: at 1300 g for 10 minutes at 20 - 25 °C.
Urine collection Kits
We offer you a wide choice of urine collection aids. All these products are aimed at performing the urine collection as comfortably, hygienically and safely as possible, and then storing the sample until analysis. The kits on this product page offer you extra convenience. By combining various items, you have everything you need in a single package.
Sharps containers
These sharps containers enable you to store and dispose of your sharps waste in a trusted, safe and user-friendly manner. All sharps containers are fitted with the so-called double closure (temporary and permanent), are easy to assemble and provided with all legally applicable instructions and symbols.